Table of Contents
Advertisement
INSTALLATION
This heater does not require a 120V A.C. supply for operation. In case of a power failure, the burner switch and the optional remote control/ thermostat
will continue to operate. However, a 120V A.C. power supply is needed for the fan/blower operation.
Electrical Grounding Instructions
This appliance is equipped with a three pronged (grounding) plug for your protection
against shock hazard and should be plugged directly into a properly grounded
three-prong receptacle. Do not cut or remove the grounding prong from this plug.
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper and dangerous operation.
24
WIRING DIAGRAMS
Neutral
Live
120V AC
WARNING:
Caution: Ensure that the wires do not touch any
hot surfaces and are away from sharp edges.
Ground
Black
ON
OFF
White
Black
Minimum Convection
Air Temp. Switch
390
390
L
PB-2 / HZI
PB-2 Direct Vent Gas Insert
Fan
Black
Advertisement
Table of Contents
