Mower Maintenance; Carburettor Adjustments; Oil Service; Air Cleaner Service - Hayter Hayterette Owner's Handbook Manual

MOWER MAINTENANCE

Carburettor Adjustments

Should only be made by an authorised Briggs & Stratton
dealer. Under no circumstances should the engine be
Declaration of Conformity.

Oil Service

Check the oil level daily before starting the engine and
ensure that the correct oil level is maintained. Refer to-
instructions.
and thereafter according to the 'Maintenance Schedule':-
1. Drain fuel by running the engine until the fuel tank is
empty.
3. Allow the engine to cool.
ensuring that the air cleaner is kept uppermost to
prevent engine damage.
suitable container.
3
1
4
1
2

Air Cleaner Service

- Do not use petroleum solvents.
- Do not use pressurised air.
- Do not oil the cartridge.
After servicing, install the cartridge into the cover. Insert
the tabs on the bottom of the cover into the slots in the
curely tighten the screw to the base.

Spark Plug Service

from any authorised Briggs & Stratton service dealer.
Check the spark plug gap with a feeler gauge and set at
-
11

Keeping Engine Clean

Remove all grass and debris from the engine including
and the surrounding deck areas on a daily basis after
use. Never spray the engine with water during cleaning.
Water can contaminate the fuel. Always clean with a
brush or compressed air.
Grass and debris may clog the engine's air cooling
system especially after prolonged operation while cutting
may require cleaning to prevent overheating and engine
- damage. We recommended that this service be carried
out by an authorised Hayter Service dealer.

Deck Housing

Remove grass debris from the top and underside of the
deck housing immediately after use.
Fertilisers and top dressings are particularly corrosive.
Thoroughly clean the mower deck immediately after
use on treated grass and store well away from corrosive
materials.