1.28 Mower Maintenance - Engine; Throttle Cable Adjustment; Carburettor Adjustments - Hayter Harrier 48 PRO Owner's Handbook Manual

111-1275 (A) 17/5/07
To prevent accidents stop the engine and disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
1. Air Cleaner
2. Cover
3. Fuel Cap
4. Start Grip
5. Oil fill/Dipstick
6. Exhaust Guard
7. Exhaust
8. Carburettor
9. Spark Plug / Lead

Throttle Cable Adjustment

Loosen casing clamp screw (1) and move the governor lever (2) in the
direction of screw (1) as far as possible. Move the throttle control to
the choke position. Tighten casing clamp screw.
Should only be made by an authorised Briggs & Stratton dealer. Under
no circumstances should the engine be adjusted to run at a speed in
excess of that shown on the Declaration of Conformity.
9:02 am Page 1.21
MOWER

Carburettor Adjustments

MAINTENANCE
Engine
3
4
2
1
9
8
1
2
5
6
7
1.21