Toshiba HWS-803XWHM3-E Service Manual page 183

No. Part name
3 Side cabinet
Procedure
1. Detachment
1) Carry out the operation in 1. of 1) above.
2) Remove the screws fixing the inverter assembly
and the side cabinet. (ST1T Ø4 × 10, 3 pcs.)
3) Remove the screws for the side cabinet and the
valve fixing plate. (ST1T Ø4 × 10, 2 pcs.)
4) Remove screw for the side cabinet and piping
panel (rear). (Hexagonal screw Ø4 × 10, 2 pcs.)
5) Remove screw for the side cabinet and the bottom
plate. (Hexagonal screw Ø4 × 10, 1 pc.)
6) Remove screws for the side cabinet, heat
exchanger and the fin guard.
(Hexagonal screw Ø4 × 10, 5 pcs.)
2. Attachment
1) Temporarily suspend the side cabinet on the
inverter assembly using the hook.
2) Mount the removed screws in the opposite
procedure to that during detachment.
Discharge port cabinet
Valve fixing plate
Inverter ass'y
182
Remarks
Side cabinet
Inverter ass'y
Hook
Valve fixing plate