Recall - Yealink SIP-T21 E2 User Manual

User Guide for the SIP-T21(P) E2 IP Phone
1. Press the OK soft key to redial the number.
Note Call completion is not available on all servers. For more information, contact your system
administrator.
You can press a recall key to place a call back to the last incoming call.
To configure a recall key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press
4. Press
5. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Recall key is configurable via web user interface at the path DSSKey->Line Key.
You can mute the microphone of the active audio device during an active call so that
the other party cannot hear you. Call mute applies to all modes (Handset, Headset and
Speakerphone).
To mute a call:
1. Press
The LCD screen indicates that the call is now muted.
86
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select ReCall from the Key Type field.
during an active call.