Yealink SIP-T21 E2 User Manual page 58

User Guide for the SIP-T21(P) E2 IP Phone
3. Enter the name and the office, mobile or other numbers in the corresponding fields.
4. Press
Account field.
If Auto is selected, the phone will use the default account when placing calls to the
contact from the blacklist directory.
5. Press the Add soft key to accept the change or the Back soft key to cancel.
To add a contact to the blacklist directory from the local directory:
1. Press the Dir soft key.
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft
key.
3. Press
4. Press the Option soft key and then select Add to Blacklist.
The LCD screen prompts the following warning:
5. Press the OK soft key to accept the change.
For operating instructions on editing, deleting, placing calls to and/or searching for
contacts in the blacklist directory, refer to the operating instructions of
48
or , or the Switch soft key to select the desired account from the
or to highlight the desired contact.
refer to Directory on page
(
Local Directory
35 ,
)
on