Phone Lock - Yealink SIP-T21 E2 User Manual

User Guide for the SIP-T21(P) E2 IP Phone
You can set the "#" key or "*" key to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Menu->Features->Key as send.
2. Press
or select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
You can lock your phone temporarily when you are not using it. This feature helps to
protect your phone from unauthorized use.
Phone lock consists of the following:
Menu Key:
Function Keys: The function keys are locked. You cannot use the MESSAGE, RD,
All Keys:
Note
The emergency number setting, if desired, must be set before lock activation. For more
information, refer to
30
or , or the Switch soft key to select # or * from the Key as send field,
The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
TRAN, OK, X, navigation keys and soft keys until unlocked.
All keys are locked except the Volume key, digit keys, # key, * key
and Speakerphone key. You are only allowed to dial emergency
numbers, reject incoming calls by pressing the X key or the
Reject soft key, answer incoming calls by lifting the handset,
pressing the Speakerphone key, the HEADSET key, the OK key, or
the Answer soft key, mute an active call by pressing the X key,
and end the call by hanging up the handset, pressing the
Speakerphone key or the EndCall soft key.
Emergency Number on page 73.