Yealink SIP-T21 E2 User Manual page 89

To place a call using the headset:
Do one of the following:
- With the optional headset connected, press
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
Press
With the optional headset connected, press
-
Enter the desired number using the keypad.
Press
Note
To permanently use the headset mode, refer to
The SIP-T21(P) E2 IP phone can handle multiple calls at a time. However, only one active
call (the call that has audio associated with it) can be in progress at any time, other
calls are placed on hold. The SIP-T21(P) E2 IP phone can handle a maximum of 50 calls
at one time.
To place multiple calls:
You can have more than one call on your SIP-T21(P) E2 IP phone. To place a new call
during an active call, do one of the following:
Press the line key. The active call is placed on hold.
-
Enter the desired number using the keypad.
Press
Press the Hold soft key to place the original call on hold.
-
Press the NewCall soft key.
Enter the desired number using the keypad.
Press
You can press
to retrieve the desired call.
Note
If multiple accounts are registered on the phone, you can first press the desired line key
on the idle screen or press the Line soft key on the dialing screen, and then you can use
the selected account to place a call.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
, , or the Send soft key.
or to switch between calls, and then press the Resume soft key
Basic Call Features
to activate the headset mode.
to activate the headset mode.
Headset Prior on page 55.
79