Yealink SIP-T21 E2 User Manual page 50

User Guide for the SIP-T21(P) E2 IP Phone
The IP phone enters the local directory directly as there is only Local Directory
enabled in the directory by default.
If Local Directory is removed from the directory
press Menu->Directory->Local Directory to enter the local directory.
2. Select the desired contact group and then press the Enter soft key.
If the contact is not in any group, select All Contacts and then press the Enter soft
key.
3. Press the Add soft key.
4. Enter the name and the office, mobile or other numbers in the corresponding fields.
5. Press
Account field.
If Auto is selected, the phone will use the default account when placing calls to the
contact from the local directory.
6. Press
Ring field.
If Auto is selected, this contact will use the ring tone according to the priority: Group
ring tone (refer to
ring tone (refer to
7. Press
field.
8. Press the Add soft key to accept the change or the Back soft key to cancel.
Note
If the contact has existed in the directory, the LCD screen will prompt "Contact name
existed!".
40
or , or the Switch soft key to select the desired account from the
or , or the Switch soft key to select the desired ring tone from the
Adding Groups) >Account ring tone (refer to
Ring Tones).
or , or the Switch soft key to select the desired group from the Group
refer to Directory on page
(
Ring Tones)>Phone
35 ,
)