Yealink SIP-T21 E2 User Manual page 64

User Guide for the SIP-T21(P) E2 IP Phone
3. Click Browse to locate the logo file from your local system.
4. Click Upload to upload the file.
Note Delete item will appear after you upload a
the custom logo.
The logo file format must be *.dob, contact your system administrator for more
information.
A custom logo can be uploaded via web user interface only.
If you want to use a headset, physically connect your headset and activate the headset
mode for use. For more information on physically connecting a headset, refer to
Installation on page 13.
To activate the headset mode:
1. Press
The headset icon on the idle screen indicates that the headset mode is activated.
Press the line key or the Answer soft key to answer an incoming call. The call will be
connected to your headset automatically.
Enter the desired number and then press the Send soft key, the phone will then
place a call using the headset automatically. For more information on using the
headset to place a call, refer to
54
on the phone.
Placing Calls
custom logo, you can click
on page 77.
Delete to delete
Phone