Walk And Talk Mode - Siemens gigaset 4010 Operating Instructions Manual

Press keys:
Add. Features
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Walk and Talk
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Walk and Talk mode

This function enables handsets (Gigaset 4000 Com-
fort) to communicate outside the range of the base sta-
tion. In Walk and Talk mode, handsets are no longer
available for incoming calls.
Example:
Two friends are in a department store and each has a
handset with the Walk and Talk mode active. They can
now communicate with each other free of charge.
Prerequisite for the handsets
Communication is only possible between:
G handsets that are registered at a common base sta-
tion and have selected this base station ie "base 1"
(see page 51)
or G handsets that have set "best base station" as their
base station.
Note: All external handsets that are within range,
that have Walk and Talk mode set and have "best
base station" as their the base station selection will
also be called
G
or handsets that are not registered.
Note: All external handsets that are within range,
have the Walk and Talk mode set and are not regis-
tered at a base station will also be called.
Œ
The maximum range between handsets operat-
ed in Walk and Talk mode is 300 m.The operating
time of the handsets is considerably reduced.
)
Activating Walk and Talk mode on the handset
Open the menu.
Select the menu item and confirm.
Activate Walk and Talk mode.
Walk and Talk mode can be deactivated with the dis-
play key .
Operating more than one handset
61