Connecting The Base Station To A Pabx; Dialling Mode And Flash Time - Siemens gigaset 4010 Operating Instructions Manual

Press keys:
Base Settings
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Add. Features
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Dialling Mode
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Base Settings
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Add. Features
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

TBR
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
Connecting the base station to
a PABX
Some telephone systems do not support the CLIP
function and therefore also do not allow SMS messag-
es to be sent or received.
See the operating instructions for the telephone
system.

Dialling mode and flash time

Step 1: Changing the dialling mode
You only need to change the dialling mode if your PABX
does not operate with preset tone dialling (DTMF dual-
tone multifrequency). Please refer to the operating
instructions for your PABX.
Options:
– Tone dialling (DTMF)
)
– Dial pulsing (DP)
Open the menu.
Select the menu item and confirm.
Select the menu item and confirm.
Select the menu item and confirm.
Select dialling mode you want and confirm.
Step 2: Setting the flash time
Prerequisite: your PABX requires a flash time other
than the preset flash time (to set up a connection to the
telephone network.
Please refer to the operating instructions for your
A
PABX.
Open the menu.
Select the menu item and confirm.
Select the menu item and confirm.
Select the menu item and confirm.
Select the flash time and confirm.
80 ms, 100 ms, 120 ms, 180 ms, 250 ms, 300 ms,
.
600 ms

Connecting the base station to a PABX

71