Assigning Authorisation From The Handset - Siemens gigaset 4010 Operating Instructions Manual

Hide thumbs Also See for gigaset 4010:

Table of Contents

Press keys:

Call Barring

]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]

Assigning authorisation from the

handset

You can use this function to prevent individual hand-

sets from dialling external numbers.

You can set the following authorisations

Internal+external – the handset can be used with-

out restriction

Ext incoming – the handset can be used for internal

calls, and external calls can be accepted

Internal only – the handset can only be used for in-

ternal calls

Display the list of the internal users.

Select the required handset.

Open the menu.

Select the function.

Enter the PIN and confirm

(factory setting 0000).

Select the required authorization and store.

Terminate the function.

You can use barred handsets to dial the emer-

gency numbers stored at the base station (see

page 70).

Operating more than one handset

Table of Contents