Call Forward - Yealink SIP-T2XP Administrator's Manual

4. Click Confirm to accept the change.

Call Forward

Call forward allows users to redirect an incoming call to a third party. IP phones redirect
an incoming INVITE message by responding with a 302 Moved Temporarily message,
which contains a Contact header with a new URI that should be tried. Three types of
call forward:
Always Forward -- Forward the incoming call immediately.

Busy Forward -- Forward the incoming call when the callee is busy.

No Answer Forward -- Forward the incoming call after a period of ring time.

Call forward can be configured on a phone or a per-line basis depending on the call
forward mode. The following describes the call forward modes:
Phone (default): Call forward feature is effective for the IP phone.

Custom: Call forward feature can be configured for each or all accounts.

The call forward on code and call forward off code configured on IP phones are used
to activate/deactivate the server-side call forward feature. They may vary on different
servers.
Forward International
Forward international allows users to forward an incoming call to an international
telephone number. This feature is enabled by default.
Procedure
Call forward can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
<y0000000000xx>.cfg
Configuring Basic Features
Configure call forward in
custom mode.
For more information, refer to
Call Forward on page 293.
Configure the call forward
mode.
Configure call forward in
phone mode.
Configure forward
international.
For more information, refer to
Call Forward on page 293.
95