Yealink SIP-T2XP Administrator's Manual page 297

Range
Example
Auto Answer
Parameter-
account.x.auto_answer
Description
Format
Default Value
Range
Example
Call Completion
Parameter-
features.call_completion_enable
Description
Format
Default Value
Range
1 to 300
auto_redial.times = 10
Configuration File
<MAC>.cfg
Enables or disables auto answer feature for
account x.
If set to 1 (Enabled), the IP phone can
automatically answer an incoming call.
X ranges from 1 to 6.
Note: The IP phone cannot automatically
answer the incoming call during a call even if
auto answer is enabled.
Boolean
0
0-Disabled
1-Enabled
account.1.auto_answer = 1
Configuration File
<y0000000000xx>.cfg
Enables or disables call completion feature.
If a user places a call and the callee is
temporarily not available to answer the call,
call completion feature allows notifying the
user when the callee becomes available to
receive a call.
If set to 1 (Enabled), the caller is notified
when the callee becomes available to
receive a call.
Boolean
0
0-Disabled
Appendix
281