Transfer Via Dtmf - Yealink SIP-T2XP Administrator's Manual

Administrator's Guide for SIP-T2xP IP Phones
To configure suppress DTMF display and suppress DTMF display delay via web user
interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Suppress DTMF Display.
3. Select the desired value from the pull-down list of Suppress DTMF Display Delay.
4. Click Confirm to accept the change.

Transfer via DTMF

Call transfer is implemented via DTMF on some traditional servers. The IP phone sends
specified DTMF digits to the server for transferring calls to a third party.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
Local
To configure transfer via DTMF via web user interface:
122
<y0000000000xx>.cfg
Web User Interface
Configure transfer via DTMF.
For more information, refer to
Transfer via DTMF on page 313.
Configure transfer via DTMF.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-general&q=load