Yealink SIP-T2XP Administrator's Manual page 186

Administrator's Guide for SIP-T2xP IP Phones
TLV Type
Optional TLVs
IEEE Std 802.3
Organizationally
Specific TLV
TIA
Organizationally
Specific TLVs
170
TLV Name
System Name
System Description
System Capabilities
Port Description
MAC/PHY
Configuration/Status
Media Capabilities
Network Policy
Extended
Power-via-MDI
Inventory –
Hardware Revision
Inventory – Firmware
Revision
Description
Name assigned to the IP phone.
The default value is "yealink".
Description of the IP phone.
The default value is "yealink".
The supported and enabled capabilities
of the IP phone.
The supported capabilities are Bridge,
Telephone and Router.
The enabled capabilities are Bridge and
Telephone by default.
Description of port that sends data unit.
The default value is "WAN PORT".
Duplex and bit rate settings of the IP
phone.
The Auto Negotiation is supported and
enabled by default.
The advertised capabilities of PMD.
Auto-Negotiation is: 100BASE-TX (full
duplex mode), 100BASE-TX (half duplex
mode), 10BASE-T (full duplex mode), or
10BASE-T (half duplex mode).
The MED device type of the IP phone
and the supported LLDP-MED TLV type
can be encapsulated in LLDPDU.
The supported LLDP-MED TLV types are:
LLDP-MED Capabilities, Network Policy,
Extended Power via MDI-PD and
Inventory.
Port VLAN ID, application type, L2 priority
and DSCP value.
Power type, source, priority and value.
Hardware revision of the IP phone.
Firmware revision of the IP phone.