Yealink SIP-T2XP Administrator's Manual page 189

VLAN Discovery via DHCP
IP phones support VLAN discovery via DHCP. When the VLAN Discovery method is set to
DHCP, the IP phone will examine DHCP option for a valid VLAN ID. The predefined
option 132 is used to supply the VLAN ID by default. You can customize the DHCP
option used to request the VLAN ID.
Procedure
VLAN can be configured using the configuration files or locally.
Configuration File
Local
To configure VLAN for Internet port via web user interface:
1. Click on Network->Advanced.
2. In the VLAN block, select the desired value from the pull-down list of WAN Port
Active.
3. Enter the VLAN ID in the VID (1-4094) field.
Features
<y0000000000xx>.cfg
Web User Interface
Phone User Interface
Configuring Advanced
Configure VLAN for the Internet
port and PC port manually.
For more information, refer to
VLAN on page 341.
Configure DHCP VLAN
discovery feature.
For more information, refer to
VLAN on page 341.
Configure VLAN for the Internet
port and PC port.
Configure DHCP VLAN
discovery feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=network-adv&q=load
Configure VLAN for the Internet
port and PC port.
173