Yealink SIP-T2XP Administrator's Manual page 153

3. Select the desired values from the corresponding pull-down list.
4. Click Confirm to accept the change.
To configure an LDAP key via web user interface:
1. Click on DSSKey->Memory Key (or Line Key).
2. In the desired memory key (or line key) field, select LDAP from the pull-down list of
Type.
3. Click Confirm to accept the change.
To configure an LDAP key via phone user interface:
1. Press Menu->Features->DSS Keys->Memory Keys (or Line Keys).
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select LDAP from the Key Type field.
5. Press the Save soft key to accept the change.
Features
Configuring Advanced
137