Use Outbound Proxy In Dialog - Yealink SIP-T2XP Administrator's Manual

Use Outbound Proxy in Dialog

An outbound proxy server can receive all initiating request messages and route them to
the designated destination. If the IP phone is configured to use an outbound proxy
server within a dialog, all SIP request messages from the IP phone will be forced to send
to the outbound proxy server.
Note
To use this feature, make sure the outbound server have been correctly configured on
the IP phone.
Procedure
Use outbound proxy in dialog can be configured using the configuration files or
locally.
Configuration File
Local
To specify whether to use outbound proxy server in a dialog via web user interface:
1. Click on Features->General Information.
<y0000000000xx>.cfg
Web User Interface
Configuring Basic Features
Specify whether to use outbound
proxy in a dialog.
For more information, refer to
Outbound Proxy in Dialog
page 289.
Specify whether to use outbound
proxy in a dialog.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Use
on
89