Yealink SIP-T2XP Administrator's Manual page 324

Administrator's Guide for SIP-T2xP IP Phones
Dialog-Info Call Pickup
Parameter-
account.x.dialoginfo_callpickup
Description
Format
Default Value
Range
Example
Web Server Type
Parameter-
wui.http_enable
Description
Format
Default Value
Range
Example
Parameter-
network.port.http
Description
308
Configuration File
<MAC>.cfg
Configures Dialog-Info Call Pickup feature for
account x.
If set to 1 (Enabled), call pickup is
implemented through SIP signals.
X ranges from 1 to 6.
Boolean
0
0-Disabled
1-Enabled
account.1.dialoginfo_callpickup = 1
Configuration File
<y0000000000xx>.cfg
Enables or disables the IP phone to access its
web user interface using HTTP protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Boolean
1
0-Disabled
1-Enabled
wui.http_enable = 1
Configuration File
<y0000000000xx>.cfg
Configures the HTTP port used to access the
web user interface of the IP phone.
The default HTTP port is 80.
Note: If you change this parameter, the IP