Adjustment - Shoprider QT-8 LITTLE BEAUTY Owner's Manual

ADJUSTMENTS
Tiller Adjustment
Lever
Tiller Angle Adjustment (Fig. 1)
At the base of the tiller is a lever.
Releasing the lever to loosen the
tiller and select the desired tiller
angle. Clamp the lever to secure
the tiller at the appropriate position.
Fig. 1
Seat Removal (Fig. 2)
Fold down the back of the seat.
Lift the swivel seat release lever
up to lift the seat up and off the
seat post.
Swivel Seat
Fig. 2
Release Lever
Armrest Width Adjustment (Fig. 3)
On the underside back of the seat there are
two armrest hand knobs, one on each side.
Turn hand knobs counterclockwise to loosen.
Pull Armrest Up
Loosening the armrest hand knob allows the
armrest width to be adjusted or armrest to
be removed. Once the desired positions of
the arm rests are set, tighten the hand knobs
by turning clockwise to lock the armrests into
Armrest Hand
place.
Knob
Do not use the scooter without the arms
being fitted.
Armrest Adjustments (Fig. 3)
Fig. 3
The armrests are hinged and can be pulled
up and out of the way for sideways transfer.
Pull armrest up and back.
8