Hisun HS500 Owner's Manual page 38

set the switch to "LOCK". When the
differential gear is locked, the differential
gear lock indicator light will come on along
with the differential gear lock indicatorin the
multifunction meter unit display .To release
the differential gear lock , stop the vehicle
and set the switch to "4WD".
WARNING
POTENTIAL HAZARD
Riding too fast while the vehicle is in
4WD-LOCK.
WHAT CAN HAPPEN
All wheels turn at the same speed when
the differential is locked, so it takes more
effort to turn the vehicle. The amount of
effort required is greater the faster you
go. You may lose control and have an
accident if you cannot make a sharp
enough turn for the speed you are
traveling.
Control Functions
HOW TO AVOID THE HAZARD
Always ride at a slow speed when the
vehicle is in 4WD-LOCK, and allow extra
time and distance for maneuvers.
NOTE:
When the switch is set to "LOCK", the
differential gear lock indicator and
indicator light will flash until the
differential gear is locked.
When the indicator and indicator light are
flashing, turning the steering wheel back
and forth will help the differential gear
lock to engage.
Riding before the differential gear lock is
properly engaged (e.g., when the
indicator and indicator light are flashing)
4-13