Wheel Installation - Hisun HS500 Owner's Manual

8-42 Periodic Maintenance and Adjustment

Wheel installation

1. Install the wheel and the nuts.
NOTE:
The arrow mark on the tire must
●
point toward the rotating direction of the
wheel.
Tapered nuts are used for both the front
●
and rear wheels. Install the nut with its
tapered side towards the wheel.
1. Arrow mark
1. Tapered nut
2. Lower the vehicle so that the wheel is on
the ground.
3. Tighten the wheel nuts to the specified
torque.
Wheel nut torque:
Front：40 ft·lbf (55Nm, 5.5 m·kgf）
Rear：40 ft·lbf (55Nm, 5.5 m·kgf）