Eps System Parameter Table - Hisun HS500 Owner's Manual

9-29 Electric power steering system
CAUTION:
Before adjust ECU for every time, please
check the clearance of mechanical part and
adjust four wheels fixed position of UTV.

EPS SYSTEM PARAMETER TABLE

EPS system basic technical parameters
EPS system working conditions
1. Working environment temperature：
-40℃～＋85℃
2. Working voltage： （9～16V） DC
3. The seal type：IP65
4. Input shaft rotation angle：
large than ±1.25rmp
5. Wheel rotation speed：
10round/min～15round/min
Motor assy basic parameters
Type: DC permanent magnet control
motor
Rated working time: 3 min/per time
Rated power：170W（nominal value）
Rated operational voltage: 12V DC
Rated motor
（1050r±300r）/min
Rated operational current：30A±3A
Rated output torque ：1.6N·m±0.16N·m
revolving speed ：