Final Gear Oil - Hisun HS500 Owner's Manual

Hide thumbs Also See for HS500:
Table of Contents

Advertisement

several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
10. Turn the engine off, wait at least ten
minutes, and then check the oil level and
correct it if necessary.
11. Install the console.

Final gear oil

Checking the final gear oil level
1. Place the vehicle on a level surface.
2. Remove the oil filler bolt, and then check
the oil level in the final gear case.
Periodic Maintenance and Adjustment
1. Speedometer sensor
2. final gear oil
3. Correct oil level
NOTE:
The oil level should be at the brim of the filler
hole.
3. If the oil is below the brim of the filler hole,
add sufficient oil of the recommended
type to raise it to the correct level.
8-17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs600utv-2Hs700utv-3Hs700utv-4

Table of Contents