Hisun HS500 Owner's Manual page 37

4-12 Control Functions
On-Command four-wheel-drive switch
"2WD/4WD"
1. Select lever
2. On-Command four –wheel-drive switch "2WD/4WD"
To change from 2WD to 4WD ,stop the
vehicle, and then set the switch to
"4WD".When the vehicle is in 4WD, the
4WD indicator will come on in the
multi-function meter unit display .To change
from 4WD to 2WD .stop the vehicle ,be sure
the select lever is set to positionⓐ, and
then set the switch to "2WD".
On-Command Differential Gear Lock
Switch "4WD"/"LOCK"
1. On-Command differential gear lock switch "4WD"/ "LOCK"
2. Select lever
To lock the differential gear in 4WD, stop the
vehicle, make sure the On-Command
four-wheel-drive switch is set to "4WD",
move the select lever to positionⓑ, and then