Hisun HS500 Owner's Manual page 161

8-58 Periodic Maintenance and Adjustment
Table 3: Solution of Common Problems in Running System
S/N Problems
Steering wheel is loose
1 and shifts up and down
when pulled.
Front wheel steering
2
clearance excessive
Front wheels sway during
3
operation
Solutions
1. Check if the steering wheel nut is loose or damaged.
2. Check if the steering column clip and clip seat loose or
damaged.
3. Check if the steering column bottom end inner bearing is
damaged.
1. Check if the tie-rod and steering column locknut has
loosened or become damaged, or if the steering knuckle and
steering column locknut has loosened or is damaged.
2. Check if the tie-rod two ball joints are damaged or loose.
1. Check if the steering knuckle bearing is damaged.
2. Check if the king pin ball joint is damaged.
3. Check if the front wheel and axle locknut is loose or damaged.
4. Check if the front wheel hub inner splines and front wheel
axle outer splines are worn or loose.
5. Check if the rubber washers connected to front suspension
rocker arms and frame are damaged.