Replacing A Headlight Bulb - Hisun HS500 Owner's Manual

Specified Fuse:
Main Fuse: 30.0A
Headlight Fuse: 15.0A
ECU Fuse: 15.0A
Auxiliary DC Jack Fuse: 10.0A
Signaling System Fuse: 10.0A
2WD/4WD Fuse 10.0A
Backup Fuse:
5.0A/10.0A/15.0A
Speedmeter/ECU 5.0A
-normal open Fuse:
4. Turn the key to "ON" and turn on the
electrical circuit in question to check if
the device operates.
5. If the fuse immediately blows again, have
a service center check the electrical
system.
Periodic Maintenance and Adjustment
WARNING
POTENTIAL HAZARD
Using an improper fuse
WHAT CAN HAPPEN
An improper fuse can cause damage to
the electrical system, which could lead to
a fire.
HOW TO AVOID THE HAZARD
A/ways use a fuse of the specified rating.
Never use a material in place of the
proper fuse.

Replacing a headlight bulb

If a headlight bulb bums out, replace it as
follows.
1. Lift the hood up.（See pages 8-7-8-8 for
hood opening and closing procedures.）
2. Remove the cover at the rear of the
headlight by pulling it off.
8-47