Changing The Clock Day And Time; Changing Default Cleaning Times; Programming Cleaning Cycles - Zodiac 3000 wd Owner's Manual

Zodiac 3000 WD, 3010 WD, & 3510 WD Robotic Pool Cleaner
®
5.2

Changing the Clock Day and Time

1. Press and hold
All days of the week flash twice.
2. Press or
through seven (7) days and display desired day.
3. Press to select.
Current hour setting flashes.
4. Press or
through 24 hours and display desired hour
setting.
NOTE: Control unit is set to display time in 24-hour
clock format. Time setting will cycle through 1-24.
5. Press to select.
Current minutes setting flashes.
6. Press or
through 1-59 minutes and display desired
minutes setting.
7. Press to select.
8. Press to set time and exit the menu.
for three (3) seconds.
buttons to cycle
buttons to cycle
buttons to cycle
|
Owner's Manual
9. Press to display current day and time
setting and verify the time you set is correct.
5.3

Changing Default Cleaning Times

Use to change cleaning surface setting.
Default cleaning times are:
Bottom Only: 1 hour 30 minutes
Bottom and Sides:
2 hours 30 minutes
Waterline: (3510 WD)
Variable cleaning time depending on settings
1. Press or
decrease cleaning time in 30-minute increments.
2. Press to select.
5.4

Programming Cleaning Cycles

You can program up to seven cleaning cycles.
Program cleaning for either seven consecutive cycles or
the same cycle repeated over several weeks
(e.g., every Wednesday and Saturday for three weeks).
1. Choose pool cleaning settings to program.
All models:
• Choose
pool or bottom plus sides of pool.
3510 WD:
• Choose
addition to bottom or bottom plus sides options.
• Choose
high intensity level cleaning.
• Choose
ENGLISH Page 15
buttons to increase or
to select either bottom of
to select waterline only in
to select intensive or
to select pool shape.