Start / Stop Cleaning And Adjust Cleaning Time; Set Cleaning Mode; Remote Control - Zodiac VX65 iQ Vortex-Pro Owner's Manual

Robotic pool cleaner
Table of Contents

Advertisement

Page 20

Start / Stop Cleaning and Adjust Cleaning Time

NOTE: During system configuration, the chosen pool shape defines robotic patterning cycles/run time
The factory default cleaning surface setting is Floor and Wall
1.
2.
3.

Set Cleaning Mode

1.
2.
3.
4.
5.

Remote Control

The cleaner can be directed using your mobile device as a remote control.
IMPORTANT: Only use Remote Control when in view of the cleaner.
1.
NOTE: When in remote control mode, the control box displays
2.
Zodiac
From the main app screen and with cleaner submerged in the water, press
START to begin operation.
The app displays the time remaining for the selected cycle in hours and minutes.
To increase or decrease the cycle time during cleaning,
press the (+) and (–) buttons.
-Time adjusts up or down in 30 minute increments.
-Minimum run time is 30 minutes.
-Maximum run time is 3 hours 30 minutes.
-The control unit displays the same countdown and cycle setting as the app.
Press STOP to interrupt and cancel an in-progress cleaning cycle.
From the main screen, select Cleaning Mode to view options.
Choose between Quick Clean, Deep Clean, Waterline Only, and Custom
modes. The selected mode is highlighted.
In Custom mode, select the cleaning surface and cleaning intensity from the on-
screen icons. Selections will be highlighted.
-Surface choices include, Floor Only, Floor and Wall, or Waterline Only
-Intensity options are Standard Intensity or High Intensity.
Press Save to keep settings or X to cancel and go back.
NOTE: Cleaning mode will be set for all current or future cleaning cycles unless adjusted on the
control box or within the app.
Press X to leave the Lift System page and return to the main screen.
From the main screen, select Remote Control.
You may choose to control the robot using joystick commands or directional
motion control.
You can switch between these modes within the app.
Joystick Control - Press the icons to direct the cleaner forward, backward and to
turn left or right.
VX65iQ Robotic Pool Cleaner
®
|
Owner's Manual
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents