I Setting The Time And Programming The Cleaning Cycles (Depending On The Model) - Zodiac Vortex RV5380 Installation And User Manual

3.7 I Setting the time and programming the cleaning cycles
• Do not disconnect the power cable once the time has been programmed or you will lose it. The
time setting will be saved for approximately 2 minutes if the power supply is disconnected.
3.7.1 Setting the time
DAY
Press for 3 seconds
The days of the week then the
LEDs start to flash.
Select the day with
or
Press to confirm,
Tip: check the time setting
Stopping the appliance if a cleaning cycle is in progress. Press
The time is displayed for 5 seconds.
HOURS
The hours start to flash
Select the hour with
or
Press to confirm,
(depending on the model)
MINUTES
The minutes start to flash
Select the minutes with
or
Press to confirm,
Exit the menu by pressing
or
.
EN
14