Section 5. Programming The Cleaner; Displaying Current Day And Time; Changing The Clock Day And Time; Changing Default Cleaning Times - Zodiac VORTEX-PRO EC15 Series Owner's Manual

Section 5. Programming the
Cleaner
(VX45 4WD/ VX50 4WD and VX55 4WD)
The control box allows you to program the cleaner to run
each day for up to 7 days, perfect for when you go away
on holidays. (It is not recommended that you keep your
cleaner in the pool for unecessary periods of time when not
running.)
NOTE: You cannot change programming or display current
day and time during a cleaning cycle.
5.1

Displaying Current Day and Time

• Press
24-hour clock format.
Current day and time is displayed for 5 seconds.
5.2

Changing the Clock Day and Time

1. Press and hold
All days of the week flash twice.
2. Press
seven (7) days and display desired day.
3. Press
Current hour setting flashes.
14
to display current day and time in
for three (3) seconds.
or buttons to cycle through
to select.
4. Press
through 24 hours and display desired hour
setting.
NOTE: Control box is set to display time in 24-hour
clock format. Time setting will cycle through 1-24.
5. Press
Current minutes setting flashes.
6. Press
through 1-59 minutes and display desired
minutes setting.
7. Press
8. Press
9. Press
setting and verify the time you set is correct.
5.3

Changing Default Cleaning Times

Use
Default cleaning times are:
Variable cleaning time depending on settings
1. Press
decrease cleaning time in 30-minute increments.
2. Press
H0516700_REV C
or buttons to cycle
to select.
or buttons to cycle
to select.
to set time and exit the menu.
to display current day and time
to change cleaning surface setting.
Floor Only: 1 hour 30 minutes
Floor and Walls:
2 hours 30 minutes
Waterline (VX55 4WD only):
or buttons to increase or
to select.