Starting The Cleaner; Stopping The Cleaner And Removing From The Pool - Zodiac 3000 wd Owner's Manual

Page 12
ENGLISH
4.4

Starting the Cleaner

The default cleaning surface setting for the cleaners
is Bottom Surface
programmed cycle, see Section 5. Programming the
Cleaner.
Select Cleaning Surface: (all models)
Use to change cleaning surface setting.
Toggle between:
Bottom and Sides
Waterline (3510 WD)
Select Cleaning Intensity Level: (3510 WD)
Use to choose cleaning intensity level.
Toggle between:
Select Pool Shape: (3510 WD)
Use to choose pool shape.
Toggle between:
Begin Cleaning:
After selecting the cleaning surface and other options as
applicable, press to begin operation.
The screen displays the time remaining for the selected
cycle. For example, 0:44 on the display indicates that
cleaning will be completed in 44 minutes.
Zodiac 3000 WD, 3010 WD, & 3510 WD Robotic Pool Cleaner
®
. To change the current
Bottom Only
INTENSIVE
HIGH INTENSITY
RECTANGULAR
FREEFORM
NOTE: The control unit automatically switches to standby
power mode after 10 minutes of inactivity and
the display screen turns off. Press any key to exit
standby mode. Cleaner will continue to function in
standby mode if in the middle of a cleaning cycle.
4.5 Stopping the Cleaner
and Removing from the Pool
The automated Lift System makes removing the cleaner
from the pool simple. The Lift System will move the
cleaner toward the edge of the pool then drive it to the
surface for removal.
1. At the end of the cleaning cycle, or at any time
during a cleaning cycle, press
the automated lift procedure.
Press and hold the Lift System button to turn
cleaner to the left. Cleaner will keep rotating
left. Once the cleaner is oriented towards the
wall of your choice, release the button.
Press and release the Lift System button and the
cleaner will drive up the wall and to the water
line and wait to be retrieved.
The screen displays
Lift System is in operation.
NOTE: To stop the lift procedure at any time, press
2. When the cleaner is within arm's reach,
handle to remove from the water
19). Never lift the cleaner out of the pool by the
floating cable.
Figure 18. Remove Cleaner From Pool with Handle
|
Owner's Manual
to begin
when the
use the
(Figures 18,
1
2
.