Initializing (Resetting) The As Menu Values - Epson EMP-S4 Service Manual

When the video source is Video type, the following screen is displayed.
Video Signal Video Signal
Total Operation Time Total Operation Time
Lamp Op. Time (C) Lamp Op. Time (C)
(H/M/L) (H/M/L) :
Lamp Replacement Lamp Replacement
Lamp ON/LampOFF Lamp ON/LampOFF
Cool Down Completed Cool Down Completed
Fatal Error Fatal Error
Destination Destination
Engine Type Engine Type
P P XXXXXXXXXXXXXXX XXXXXXXXXXXXXXX
O O ------------------ ------------------
J J XXXXXXXXXXXXXXX XXXXXXXXXXXXXXX

5.1.2 Initializing (Resetting) the AS Menu Values

There are two levels of initialization that can be used to reset the projector usage history values
stored in EEPROM.
1. Clearing the Basic Lamp Information
While the AS menu is being displayed, simultaneously press the
10 seconds.
2. Clearing All the Lamp Information
While the AS menu is being displayed, simultaneously press the
10 seconds.
Total Operation Time
Lamp Operation Time
Lamp ON
Lamp OFF
Lamp Replacement
Fatal Error (3 items)
SEIKO EPSON
: ---- : ---- (No Signal (No Signal
: : 0H 0H
: : 0H 0H
: 0H 0H / /
: : 0Times 0Times
: : 0Times 0Times
: : 0Times 0Times
: T 0 L 0 I 0 : T 0 L 0 I 0
: XXXXXXXX : XXXXXXXX
: XXXXXXX : XXXXXXX
Clearing the Lamp Informa-
Item
EMP-S4
Computer Computer
) )
0H / 0H / 0H 0H
The last four digits show the PW
firmware version.
The last four digits show the Y43
firmware version.
tion
No Change
Reset to 0H
Reset to 1
Reset to 0
Add 1 to the
current value
No Change
5-3
and keys for
[Source] [ ]
and keys for
[Source] [ ]
Clearing All the Lamp
Information
Reset to 0H
Reset to 0H
Reset to 1
Reset to 0
Reset to 0
Reset to 0
Revision:B