Initializing (Resetting) The As Menu Values - Epson EH-TW8000 Service Manual

EH-TW8000/TW9000/TW9000W

4.1.3 Initializing (Resetting) the AS Menu Values

The operational procedures and the values of initialization of the AS Menu are shown
below.
Clearing the Lamp
Type
Information
Operation
Press [ ] and [Up]
on the projector for
10 sec. during dis-
Item
playing the menu.
Total Operation
N/A
Time
Lamp Operation
Reset to 0
Time (C/H//L/3D)
Lamp ON Reset to 1
Lamp OFF Reset to 0
Add 1 to the
Lamp Replacement
current value
Cool Down
Reset to 0
Completed
Error Log N/A
Error Count N/A
Control N/A
SEIKO EPSON
Clearing the AS Clearing the Log
Information Information
Press [Right] either
on the projector or
Press [ ] and
the controller for
[Down] on the pro-
more than 5 sec.,
jector for 10 sec. dur-
then within 3 sec.
ing displaying the
press [Enter] for 2
menu.
sec. during display-
ing the menu.
Reset to 0 N/A
Reset to 0 N/A
Reset to 1 N/A
Reset to 0 N/A
Reset to 0 N/A
Reset to 0 N/A
Spacing (Initialized
N/A to the status of
acquiring none)
N/A Reset to 0
N/A N/A
Appendix
125
CONFIDENTIAL
Revision A