Epson EMP-S4 Service Manual page 82

3. Remove the EMI Control Sheet from the MA Board Assy.
4. Remove the (C.C., 3x6, F/ZN-3C) screw to remove the MA Board Assy.
When installing the MA Board Assy, pay attention to the followings.
C A U T I O N
1). Fix both the RC Cable B and the Intake Fan Cable with two pieces of
heat-resistant tape as shown in Figure 4-20.
SEIKO EPSON
EMP-S4
Figure 4-19.
Intake Fan Cable
4-20
EMI Control Sheet
RC Cable; B
Figure 4-20.
MA Board Assy.
Revision:B