Epson EMP-S4 Service Manual page 76

After connecting the SW Cable Au, aslant to fold and secure it with a piece of
C A U T I O N
heat resistant tape as shown in Figure 4-10. Make sure that the fold is kept 1
cm away from the SW Board Assy.
PRINTED CIRCUIT BOARD
ASSEMBLY; SW_R1
After connecting the SW Cable, be sure to secure the cable with a piece of
heat-resistant tape as shown in Figure 4-11.
SEIKO EPSON
EMP-S4
cable sw, Au
Figure 4-10.
Figure 4-11.
4-14
1cm
Heat-Resistant Tape
Heat-Resistant Tape
cable sw
Revision:B