Removing The Rc Board Assy, Rc Cable B, Safety Switch, Intake Duct, Intake Fan, And Intake Fan Sheet - Epson EMP-S4 Service Manual

4.2.15 Removing the RC Board Assy, RC Cable B, Safety Switch,
Intake Duct, Intake Fan, and Intake Fan Sheet
1. Remove the RC Board Assy, and disconnect the RC Cable B from the RC Board Assy.
2. Remove the (C.C.P-TITE, 3x8, F/ZN-3C) screw that secures the Safety Switch, and remove
the Safety Switch from the Inner Exhaust Duct.
3. Remove the 5 (C.B.P-TITE, 3x10, F/ZB-3C) screws that secure the Intake Duct to remove
it.
4. Remove the four (C.B.P-TITE SCREW, 3x12, F/ZN-3C) screws that secure the Intake Fan,
and remove the Intake Fan.
5. Remove the Intake Fan Sheet from the Intake Fan.
Intake Fan Sheet
Intake Fan
RC Board Assy.
SEIKO EPSON
EMP-S4
Safety Switch
RC Cable, B
Figure 4-29.
4-27
Intake Duct
Intake Fan
Intake Fan Sheet
Revision:B