Epson EMP-S4 Service Manual page 93

EMP-S4
When installing the Ballast Cable, route the cable and move the ferrite core
C A U T I O N
into the position as shown in Figure 4-34.
Ballast Cable Ferrite Core
Figure 4-34.
2. Remove the two (C.B.P-TITE SCREW, 3x30, F/ZN-3C) screws that secure the Exhaust Fan
B, and remove the Outer Exhaust Duct from the Exhaust Fan Set.
Outer Exhaust Duct
Exhaust Fan, B
Figure 4-35.
SEIKO EPSON 4-31 Revision:B