Saving And Resetting Menu Selections; Creating Memory Settings; Recalling Memory Settings - Epson PowerLite Cinema 500 User Manual

Saving and Resetting Menu Selections

Once you've adjusted the picture settings, you can save them as a group using the Memory
feature. This lets you easily recall them, and switch from one group of settings to another.
If necessary, you can use the projector's reset options to restore its factory-default settings.
You can clear all the settings, or just the settings in a specific menu.

Creating Memory Settings

After adjusting the picture to your liking, you can save your settings as a group in the
projector's memory. This stores all the image quality settings described on pages 29
through 33, the image sizing options (page 36), and the Aspect and Color Mode settings
(pages 23 and 24).
1. Press the
2. Open the
you've made changes using the RGBCMY settings).
3. Select the memory name you want to use, then press the
Note: Saved settings are indicated by a green
select a name that is already in use, the existing settings will be erased and new ones saved in
their place. You can use Cinema Color Editor to rename the settings (see page 51).

Recalling Memory Settings

Once you have created one or more memory settings, you
can easily recall them:
1. Press the
2. If necessary, choose
type of setting you want to use.
3. Use the arrow buttons to select the desired setting, then
press the
After a moment, the image appears on the screen using
your selected setting.
34
Saving and Resetting Menu Selections
button on the remote control.
Menu
menu, then select
Image
button on the remote control.
Memory
Standard
button.
Memory: Standard
highlight next to the memory name. If you
or to select the
Advance
(or
Memory: Advance
button to save your settings.
Memory
button
if