Removing The Exhaust Fan Set, Outer Exhaust Duct, And Exhaust Fan B - Epson EMP-S4 Service Manual

4.2.17 Removing the Exhaust Fan Set, Outer Exhaust Duct, and
Exhaust Fan B
1. Remove the (C.B.P-TITE, 3x10, F/ZB-3C) screw that secures the Exhaust Fan Set and
remove it.
When installing the cable of both the Lamp Lid Detection Switch and the
C A U T I O N
Exhaust Fan, route them as shown in Figure 4-33.
SEIKO EPSON
EMP-S4
Figure 4-32.
Lamp Lid Detection Switch Cable
Figure 4-33.
4-30
Exhaust Fan Set
Exhaust Fan Cable
Revision:B