Overview; Precautions - Epson EMP-S4 Service Manual

4.1 Overview

This chapter describes the procedures for disassembling and assembling the main components
of the EMP-S4 projector. Unless otherwise specified, reassembly is the reverse of the disas-
sembly procedure. Read the precautions described in the next section before starting.

4.1.1 Precautions

Some procedures require specific precautions that must be followed, and those will be noted
throughout this chapter. Note the following precaution definitions:
WARNING
W A R N I N G Procedures which, if not strictly observed, could result in personal injury are
described under the heading WARNING
CAUTION
C A U T I O N CAUTION signals a precaution which, if ignored, could result in damage to
equip-ment.
REASSEMBLY
If assembly needs special attention or the procedure is different from the reversed
disassembly procedure, the correct procedure is described under the heading
REASSEMBLY.
CHECK POINT
C H E C K
Important tips for procedures are described under the heading CHECK POINT.
P O I N T
The precautions in the two lists below, WARNING and CAUTION, must always be followed
during disassembly and assembly. Before starting the disassembly work on this product, read
and follow these precautions.
SEIKO EPSON
EMP-S4
4-2 Revision:B