Front View Of The Hp Storeonce 4900 Backup System - HP StoreOnce 4900 Backup Installation And Configuration Manual

Front view of the HP StoreOnce 4900 Backup system

The HP StoreOnce 4900 Series Backup system consists of a head server unit (with two disks) and
one disk enclosure with 15 disks on which storage has already been expanded. It supports
additional disks in the first disk enclosure (44TB Expansion Kits) and connection of an additional
disk enclosure (60TB Capacity Expansion Kit). Storage must be expanded when expansion kits
are added to the base configuration.
Figure 24 Front view of the HP StoreOnce 4900 Backup system
1. NIC status LED
2. System Health LED
3. Power On button/LED
4. UID button
5. System Insight Display
6. Hot plug drives
Off: no network connection or network not configured
Steady green: network connected
Flashing green: network activity
Steady green: Hardware is performing correctly
Flashing amber: degraded condition
Flashing red: critical condition, such as power supply or
fan failure
Steady green: Power connected, device ready to use
Flashing green: performing power on sequence
Steady amber: Device switched off or in hibernation with
power connected
Steady blue: identifies the unit
Off: No power connected
Steady blue identifies the StoreOnce Backup system in the
rack.
Flashing blue: remote management or firmware upgrade
in progress
The HP systems Insight Display LEDs represent the system
board layout and may be useful for troubleshooting. See
the "Maintenance and Service Guide" for more details.
These drives contain the operating system and filesystem.
They are not used for data storage.
Front view of the HP StoreOnce 4900 Backup system 103