Table of Contents
Advertisement
Galaxy Raid GHDX4 SAS<>-SAS/SATA 12Bay Installation / Hardware Reference Manual
Step 3.
Step 4.
2.9
Drive Tray Installation
Once the hard drives have been secured within the drive trays, the
drive trays can be installed into the system.
All drive trays must be installed into the enclosure even if they do
not contain a hard drive. If there are empty drive bays, the
ventilation airflow will be disrupted and the system will overheat.
Step 1.
Step 2.
2-20
Mounting Hole Locations
Secure the disk drive with four (4) of the supplied 6/32
flat-head screws.
Once the hard drives are installed into drive trays,
install all drive trays into the enclosure. See detailed
instructions in the following section.
WARNING!
Use a small-size, 1/8", flat-blade screwdriver to turn
the rotary bezel lock to the unlocked position, i.e.,
the groove on its face is in a horizontal orientation.
Front Bezel Rotary Lock
Open the front bezel on the drive tray. Push the
release button on the drive tray. The front bezel will
spring open.
Advertisement
Table of Contents
