Table of Contents
Advertisement
Galaxy Raid GHDX4 SAS<>SAS/ SATA 12Bay Installation / Hardware Reference Manual
Step 3.
Step 4.
Step 5.
Step 6.
5-4
This function is accessed from Main Menu -> System
Functions.
Power off the system. Power off the system in the way
described in Chapter 3. Be sure to flush all cached data before
powering off the system. If it is not possible to do this turn off
both PSU modules and disconnect the power cords.
Disconnect all cables that are connected to the controller
module you wish to replace.
Loosen the retention screws from controller. Use a
medium-size Phillips screwdriver to remove the screws
underneath each of the ejection levers. Keep the screws for
later use.
Remove the controller module by pressing down the two
ejection levers. The controller will be eased out of the module
bay. Gently pull the controller module out of the system with
one hand underneath to support the weight of the module.
Removing a Controller Module
Advertisement
Table of Contents
