Table of Contents
Advertisement
Galaxy Raid GHDX4 SAS<>SAS/ SATA 12Bay Installation / Hardware Reference Manual
5.7.2 Replacing a Hard Drive
To replace a hard drive, please follow these steps:
Hard drives are fragile; therefore, always handle them with
extreme care.
Do not drop the hard drive.
Always be slow, gentle, and careful when handling a hard
drive.
Handle a hard drive only by the edges of its metal cover, and
avoid touching its circuits part and interface connectors.
Step 1.
Removing the wrong drive can fatally destroy a logical drive.
Step 2.
5-16
WARNING!
Remove the front bezel if installed and identify the location
of the drive tray that contains a hard drive indicated as faulty.
You may use firmware utility or Galaxy Array Manager software
to locate a faulty drive. The drive tray LED should also light red.
The diagram below shows the numbering of the hard disk drive
slots.
Slot 1
Slot 2
Slot 5
Slot 6
Slot 9
Slot 10
Hard Drive Numbering
WARNING!
Use a flatblade screwdriver to turn the rotary bezel lock to
the unlocked position, i.e., the groove on its face is in a
horizontal orientation.
Slot 3
Slot 4
Slot 7
Slot 8
Slot 11
Slot 12
Advertisement
Table of Contents
