Table of Contents
Advertisement
8. Operate the system in an environment with least humidity.
9. Place the system on a reliable surface when servicing individual
modules. A drop or fall can cause injury.
10. Make sure the voltage of the power source is within the rated
values before connecting the system to the power source. You
may also refer to Appendix A of this manual for technical details.
11. Airflow considerations: The system requires an airflow clearance
especially on the front and the rear sides. For proper ventilation,
a minimum of 2.5cm is required between the front of the
enclosure and rack cover; a minimum of 18 to 20cm is required
on the rear side.
12. Do not cover the convection holes on the controller faceplate.
They provide passages for air circulation, and also a glimpse of
the 7-seg LED for debug purposes.
Chapter 2: Hardware Installation
Airflow Direction
2-5
Advertisement
Table of Contents
