Opening the Front Flap
Step 3.
Open the tray bezel by pushing the release button. The front
bezel will automatically swing open.
Opening the Drive Tray Front Bezel
Step 4.
Remove the drive tray by pulling it one inch away from the
drive bay. Wait for at least 30 seconds for the disk drive to
spin down, and then gently and carefully withdraw the drive
tray from the chassis.
Step 5.
Remove the four (4) retention screws that secure the hard
drive from the sides of the drive tray (two on each side.)
Loosening the Hard Drive Screws
Chapter 5: System Maintenance
5-17