Option Menu - Eiki EK-810U Owner's Manual

Option Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Enter button to confirm.
Item
Auto Source
High Altitude
Test Pattern
Background Color
Hot-Key settings
Power Settings
Light Source Settings
Light Sensor
Information
Factory Reset
Service
PICTURE
Auto Source
High Altitude
Test Pattern
OUTPUT
Background Color
Hot-Key settings
Power Settings
SETUP
Light Source Settings
Light Sensor
Information
OPTION
Factory Reset
Select "On" to allow the projector to search for other signals if the current
input signal is lost. When the setting is disabled, the projector will only
search current input connection.
Set high altitude mode On/Off. When On, the fan will operate at high speed
to ensure sufficient air flow for high altitudes.
Choose the desired internal test pattern to display. Press the Pattern button
to display next test pattern.
Use this feature to display a "Logo", "Blue", "Black" or "White" screen when
no signal is available.
Assign a different function to the hot-key on the remote control by
highlighting the function in the list and pressing the Enter button. Choose
a function that does not already have a dedicated button, and assign the
hot-key to that function, allowing you to quickly and easily use the chosen
function.
Configure the power settings. See "Power Settings Menu" on page 42.
Configure the light source settings. See "Light Source Settings Menu" on
page 43.
Calibrate the Light Sensor for use with the Constant Luminance mode,
which allows the projector to be set for constant brightness. If the Light
Sensor has not been calibrated, Constant Luminance mode will be
disabled.
Display the projector information for source, resolution, and software
version on the screen.
Restore all settings to their default value. It will not reset network.
WARNING: After resetting, lens calibration is necessary.
For service only.
DLP Projector — Owner's Manual
OPTION
Description
41
— —
On
Off
Off
Logo
Blank Screen